1
/
of
6
My Store
Straight Line Stripe Embossing Stamp For Polymer Clay | Flower Stamp | Clay Cutter | Texture Mat | Flower Design | Acrylic Stamp | Bake Clay
Straight Line Stripe Embossing Stamp For Polymer Clay | Flower Stamp | Clay Cutter | Texture Mat | Flower Design | Acrylic Stamp | Bake Clay
Regular price
$8.25 USD
Regular price
Sale price
$8.25 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
These geometrical Straight Line designs will bring some Spring into your clay projects with these acrylic embossing (raised or inverted) stamps! These sturdy 3mm clear acrylic are engraved with designs that when pressed into your clay will leave a raised design (as shown in photo). Perfect size for earrings, pendant necklaces, and keychains! Other sizes are available, please send me a message!
You will need a rolling pin, and a clean flat surface to use these acrylic trays.
Design measures: 2.5" tall 2.5" wide, and over all dimensions of the acrylic trays are 2.5" wide by 2.5" tall. When used correctly, acrylic will last a very long time.
We recommend dusting both your clay and the acrylic tray with corn or all purpose flour to allow an easy transfer of the design without sticking.
These designs are quite detailed so we recommend having basic clay working knowledge before attempting using them.
Trays will be shipped with a white masking tape on the acrylic to prevent scratches during shipping. This can be easily peeled off before use. Please take care when washing the trays: only use a soft cloth or soft bristled toothbrush and warm soapy water. Regular brushes can scratch the acrylic. Never use sharp objects such as needles as you can ruin the engraved design and damage the tray.
How To Use:
1. Condition your clay so it's easily mailable.
2. Roll out your clay to a uniform thickness, we recommend 2.5mm-3mm (We sell acrylic guides for this separately)
3. Dusting a thin layer of corn/all purpose flour on the stamp and your clay will make it easier to peel the clay from the tray. Be sure to brush off any access flour before rolling so it does not clot on your image.
4. Gently lay your flattened clay on top of the stamp and roll your roller several times over the clay. Make sure you turn the tray so you're rolling from each direction to make sure the clay goes into each part of the design. (This can take some practice so don't get discouraged if your design doesn't turn out the first try. Simply roll your clay into a ball and start again!)
5. Be careful when peeling your clay from the tray to prevent tears or stretching the design. If there is any flour left on the clay, simply take a fan brush and softly brush it off.
Care & Cleaning:
Sometimes clay or flour can get stuck in the design. Please take care when washing the trays: only use a soft cloth or soft bristled toothbrush and warm soapy water. Regular brushes can scratch the acrylic. Never use sharp objects such as needles as you can ruin the engraved design and damage the tray.
You will need a rolling pin, and a clean flat surface to use these acrylic trays.
Design measures: 2.5" tall 2.5" wide, and over all dimensions of the acrylic trays are 2.5" wide by 2.5" tall. When used correctly, acrylic will last a very long time.
We recommend dusting both your clay and the acrylic tray with corn or all purpose flour to allow an easy transfer of the design without sticking.
These designs are quite detailed so we recommend having basic clay working knowledge before attempting using them.
Trays will be shipped with a white masking tape on the acrylic to prevent scratches during shipping. This can be easily peeled off before use. Please take care when washing the trays: only use a soft cloth or soft bristled toothbrush and warm soapy water. Regular brushes can scratch the acrylic. Never use sharp objects such as needles as you can ruin the engraved design and damage the tray.
How To Use:
1. Condition your clay so it's easily mailable.
2. Roll out your clay to a uniform thickness, we recommend 2.5mm-3mm (We sell acrylic guides for this separately)
3. Dusting a thin layer of corn/all purpose flour on the stamp and your clay will make it easier to peel the clay from the tray. Be sure to brush off any access flour before rolling so it does not clot on your image.
4. Gently lay your flattened clay on top of the stamp and roll your roller several times over the clay. Make sure you turn the tray so you're rolling from each direction to make sure the clay goes into each part of the design. (This can take some practice so don't get discouraged if your design doesn't turn out the first try. Simply roll your clay into a ball and start again!)
5. Be careful when peeling your clay from the tray to prevent tears or stretching the design. If there is any flour left on the clay, simply take a fan brush and softly brush it off.
Care & Cleaning:
Sometimes clay or flour can get stuck in the design. Please take care when washing the trays: only use a soft cloth or soft bristled toothbrush and warm soapy water. Regular brushes can scratch the acrylic. Never use sharp objects such as needles as you can ruin the engraved design and damage the tray.
Share
